Gas turbines and compressors require air filters installed in supply air systems to provide superior protection of the blades against fouling, erosion, and corrosion to ensure optimal performance while guaranteeing low resistance to airflow (increased output) and extended service life (reduction of shut downs).
Gas Turbine Filters
Our Gas Turbine Filters
Appropriate products include Medium and High Efficiency Pocket, MV, MX and MINI Pleat filters as well as TFP cartridges
 |
 |
 |
 |
Lowest Pressure Drop: .42″ pressure drop at 600 cfm translates into significant increase in engine performance over competitive filters with .55-.60″ pressure drop.
Longest Filter Life: Depth loading media increases filter life by 2-4 times over the competition, which often face load, meaning the particles stick to the front surface and plug quicker.
Highest Efficiency: We offer the highest efficiency filters available for gas turbine intakes. That means fewer particles reach the turbine blades reducing your maintenance costs. Our 93% initial efficiency far surpass the competition.
Moisture Resistant: Synthetic non woven, depth loading media is hydro- phobic, meaning it resists moisture. Moisture causes the competitions filter media to swell which further increases the pressure drop, reducing output performance.
Overall Cost Effectiveness: Although the initial cost is higher, the pay back on these filters is significant due to all of the above factors. Longer life, Lower pressure drop, higher efficiency add up to overall cost savings.
Medium Gas Turbine Filters
| F50 | T60 | GF55 | GF65 | |
|---|---|---|---|---|
| Rated Air Flow (cfm) | 2000 | 2000 | 2000 | 2000 |
| Average Dust Spot Efficiency (%)* | 50 | 62 | 55** | 65** |
| Initial Efficiency on Particles >3 microns (%) |
64 | 90 | 67 | 92 |
| Initial Resistance (in. w.g.) |
0.17 | 0.20 | 0.17 | 0.20 |
| Max. Temperature (ºF) | 160, peaks 200 |
160, peaks 200 |
160, peaks 200 |
160, peaks 200 |
| UL 900 Classification | Class 2 | Class 2 | Class 2 | Class 2 |
| Depth (in) | 26 | 26 | 26 | 26 |
| Size Availability | 1/1, 5/6, 1/2,1/4 and S 1/1 – 18″ |
1/1, 5/6, 1/2 and S 1/1 – 18″ |
1/1, 5/6, 1/2 and S 1/1 – 18″ |
1/1, 5/6, 1/2 and S 1/1 – 18″ |
* According to ASHRAE 52.1 – 1992 ** Target Data
High Efficiency Pocket
| MF90 | MF95 | T90 | T98 | |
|---|---|---|---|---|
| Rated Air Flow (cfm) | 2000 | 2000 | 2000 | 2000 |
| Average Dust Spot Efficiency (%)* | 97 | 98 | 94 | 98 |
| Initial Efficiency on Particles >1 micron (%) |
98 | >99 | >95 | >99 |
| Initial Resistance (in. w.g.) |
0.42 | 0.54 | 0.39 | 0.30 |
| Burst Strength (in. w.g.) |
>12 | >12 | >12 | >12 |
| Max. Temperature (ºF) | 160, peaks 200 |
160, peaks 200 |
160, peaks 200 |
160, peaks 200 |
| UL 900 Classification | Class 2 | Class 2 | Class 2 | Class 2 |
| Depth (in) | 26 | 26 | 26 | 26 |
| Size Availability | 1/1, 5/6, 1/2, 1/4 and S 1/1 – 18″ |
1/1, 5/6, 1/2, 1/4 |
1/1, 1/2 | 1/1, 5/6, 1/2, 1/4 |
* According to ASHRAE 52.1 – 1992
MV
| MV65 | MV75 | MV85 | MV95 | |
|---|---|---|---|---|
| Rated Air Flow (cfm) | 2000 | 2000 | 2000 | 2000 |
| Average Dust Spot Efficiency (%)* | 65 | 75 | 85 | 95 |
| Initial Efficiency on Particles >1 micron (%) |
>69 | >80 | >91 | >94 |
| Initial Resistance (in. w.g.) |
0.26 | 0.27 | 0.29 | 0.33 |
| Max. Temperature (ºF) |
160, peaks 175 |
160, peaks 175 |
160, peaks 175 |
160, peaks 175 |
| UL 900 Classification | Class 2 | Class 2 | Class 2 | Class 2 |
| Depth (in) | 11.5 | 11.5 | 11.5 | 11.5 |
| Size Availability | 1/1, 5/6, 5/5,1/2 | 1/1, 5/6, 5/5,1/2 | 1/1, 5/6, 5/5,1/2 | 1/1, 5/6, 5/5,1/2 |
* According to ASHRAE 52.1 – 1992
Depth-loading filter cartridges TFP 60 and TFP 90
| Unit | TFP60 | TFP90 | |
| Filtering area | ft2 (m2) | 33 (3) | 120 (11) |
| Thermal stability | °F (ºC) | 158°F (70°C) Peaks to 176°F (80°C) |
158°F (70°C) Peaks to 176°F (80°C) |
| Moisture resistance | % | 100 | 100 |
| Average arrestance | % | 99 | 100 |
| Average efficiency | % | 65 | 96 |
| Nominal volume flow rate | ft3/m (m3/h)) | 600 (1000) | 600 (1000) |
| Initial pressure drop | in. H2O (Pa) | 0.44 (108) | 0.44 (109) |
| Recommended final pressure drop |
in. H2O (Pa) | 3.2 (800) | 3.2 (800) |
| Dust holding capacity* (ISO Fine / 3.2 in. H2O, 800 Pa) |
oz (g) | 81 (2300) | 42 (1200) |
MX
| MX75 | MX85 | MX95 | MX98 | MX100 | |
|---|---|---|---|---|---|
| Rated Air Flow (cfm) | 2000 | 2000 | 2000 | 2000 | 2000 |
| Average Dust Spot Efficiency (%)* |
75 | 85 | 95 | 98 | – |
| DOP Efficiency (5) | – | – | – | – | 96 |
| Initial Efficiency on Particles >1 micron (%) |
>87 | >95 | >97 | >99 | >99.8 |
| Initial Resistance (in. w.g.) |
0.30 | 0.34 | 0.40 | 0.46 | 0.80 |
| Burst Strength (in. w.g.) | – | – | – | – | – |
| Max. Temperature (ºF) | 160, peaks 200 |
160, peaks 200 |
160, peaks 200 |
160, peaks 200 |
160, peaks 200 |
| UL 900 Classification | – | – | – | – | – |
| Depth (in) | 11.5 | 11.5 | 11.5 | 11.5 | 11.5 |
| Size Availability | 1/1, 5/6,1/2 | 1/1, 5/6,1/2 | 1/1, 5/6,1/2 | 1/1, 5/6,1/2 | 1/1, 5/6,1/2 |
* According to ASHRAE 52.1 – 1992
Mini Pleat Filters
| Mini75-2/44 | Mini85-2/44 | Mini95-2/44 | Mini75-4/44 | Mini85-4/44 | Mini95-4/44 | |
|---|---|---|---|---|---|---|
| Rated Air Flow (cfm) | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 |
| Average Dust Spot Efficiency (%)* |
75 | 85 | 95 | 75 | 85 | 95 |
| Initial Efficiency on Particles >1 micron (%) |
>80 | >91 | >94 | >80 | >91 | >94 |
| Initial Resistance (in. w.g.) |
0.25 | 0.43 | 0.48 | 0.20 | 0.38 | 0.44 |
| Max. Temperature (ºF) | 160, peaks 175 |
160, peaks 175 |
160, peaks 175 |
160, peaks 175 |
160, peaks 175 |
160, peaks 175 |
| UL 900 Classification | Class 2 | Class 2 | Class 2 | Class 2 | Class 2 | Class 2 |
| Depth (in) | 2 | 2 | 2 | 4 | 4 | 4 |
| Size Availability | All standard sizes | All standard sizes | All standard sizes | All standard sizes | All standard sizes | All standard sizes |
* According to ASHRAE 52.1 – 1992
TFP Cartridges
| MV65 | MV75 | MV85 | MV95 | |
|---|---|---|---|---|
| Rated Air Flow (cfm) | 2000 | 2000 | 2000 | 2000 |
| Average Dust Spot Efficiency (%)* | 65 | 75 | 85 | 95 |
| Initial Efficiency on Particles >1 micron (%) |
>69 | >80 | >91 | >94 |
| Initial Resistance (in. w.g.) |
0.26 | 0.27 | 0.29 | 0.33 |
| Max. Temperature (ºF) |
160, peaks 175 |
160, peaks 175 |
160, peaks 175 |
160, peaks 175 |
| UL 900 Classification | Class 2 | Class 2 | Class 2 | Class 2 |
| Depth (in) | 11.5 | 11.5 | 11.5 | 11.5 |
| Size Availability | 1/1, 5/6, 5/5,1/2 | 1/1, 5/6, 5/5,1/2 | 1/1, 5/6, 5/5,1/2 | 1/1, 5/6, 5/5,1/2 |
* According to ASHRAE 52.1 – 1992
Depth-loading filter cartridges TFP 60 and TFP 90
| Unit | TFP60 | TFP90 | |
|---|---|---|---|
| Filtering area | ft2 (m2) | 33 (3) | 120 (11) |
| Thermal stability | °F (ºC) | 158°F (70°C) Peaks to 176°F (80°C) |
158°F (70°C) Peaks to 176°F (80°C) |
| Moisture resistance | % | 100 | 100 |
| Average arrestance | % | 99 | 100 |
| Average efficiency | % | 65 | 96 |
| Nominal volume flow rate | ft3/m (m3/h)) | 600 (1000) | 600 (1000) |
| Initial pressure drop | in. H2O (Pa) | 0.44 (108) | 0.44 (109) |
| Recommended final pressure drop |
in. H2O (Pa) | 3.2 (800) | 3.2 (800) |
| Dust holding capacity* (ISO Fine / 3.2 in. H2O, 800 Pa) |
oz (g) | 81 (2300) | 42 (1200) |
No products were found matching your selection.
